FAQ'S
What is your warranty?
Please reference our product warranty at this link for complete details.
What is a U-factor?
The U-factor is a measure of heat flow or conductivity through a material, the reciprocal of R-value. Although R-values are used as for measures of the resistance to heat flow for individual building materials, U-factor is always used to measure the conductive energy of building enclosures.
Why consider vinyl windows?
Why Buy Vinyl Windows? Vinyl: A Wise Choice
What is a Design Pressure Rating?
Design pressure, or also referred to as DP, expresses a numerical value that defines the structural wind loading requirements (in pounds per square foot) for a building and the components and cladding of a building. For windows and patio doors, the higher the DP rating indicates better performance under wind load (eg: a DP-50 window is structurally more sound than a window rated DP-35). Coastal regions often require higher DP ratings by code to anticipate higher wind velocities that can be encountered in proximity to the coast line.
What is a TDI rated window or patio door?
The Texas Department of Insurance (TDI) evaluates windows and patio doors for compliance with the wind loads specified in the International Residential Code (IRC) and the International Building Code (IBC). A TDI product evaluation is not an endorsement of the product or a recommendation that the product be used. Their product evaluation is intended for use by those individuals who are following the design and load criteria in chapter 3 of the IRC and section 1609 of the IBC, considering that they install product in accordance with the manufacturer’s installation instructions.
What is meant by “Solar Heat Gain Coefficient” (or, sometimes expressed as “SHGC”)?
The number to know when selecting windows and patio doors – it measures how much of the sun’s heat is transmitted through these fixtures, expressed in a number from zero to one. A window that has a SHGC of .30 will allow 30 percent of the sun’s heat to pass through. Whether you want a higher or lower number will depend on your goal. Especially in the South, you will be primarily interested in a window or patio door with a low SHGC that will help to block solar heat gain inside your home, thus reducing cooling loads in hot weather. Northern climates often look for higher SHGC performance to harness passive solar warmth on cold, sunny winter days.
What is low-E glass?
Low-E stands for low-emissivity glass – this is a nearly invisible coating on the glass surface that are microscopically thin metallic oxide layers primarily to reduce the U-factor by suppressing radiative heat flow. The principal mechanism of heat transfer in multilayer glazing is thermal radiation from a warm pane of glass to a cooler pane. Coating a glass surface with a low-emittance material and facing that coating into the gap between the glass layers blocks a significant amount of this radiant heat transfer, thus lowering the total heat flow through the window. Low-E coatings are nearly transparent to visible light. Our primary glass supplier, Cardinal Glass, offers informative details on their website (www.cardinalcorp.com).
What is STC (Sound Transmission Class)?
STC is a performance rating for measuring the sound suppression effectiveness of interior wall partitions against noises from speech, television, radio and office equipment that is also commonly used to describe the acoustic performance of windows and other exterior wall components. The higher the number, the better the performance. It is also important to consider the OITC (Outdoor Indoor Transmission Class) and EWNR (Exterior Wall Noise Reduction) when considering the acoustic performance of windows, as these ratings are specifically designed to gauge the effectiveness of windows and exterior walls against noise from sources like motor vehicles, aircraft and trains. As with STC ratings, the higher the number, the better the performance.
What is a good source for window installation information?
We recommend that you refer to the American Society of Testing and Materials (ASTM) guide entitled: ASTM E 2112 “Standard Practice for Installation of Exterior Windows, Doors and Skylights” for comprehensive installation guidance and best practices (www.astm.org).
For coastal region installation consideration, you can also refer to the American Architectural Manufacturers Association (AAMA) guide 100-07 (www.aamanet.org).
Who is the NFRC?
The National Fenestration Rating Council (NFRC) is a non-profit, public/private organization created by the window, door and skylight industry. It is comprised of manufacturers, suppliers, builders, architects and designers, specifiers, code officials, utilities and government agencies. NFRC has established a voluntary national energy performance rating and labeling system for windows, doors and skylights. For more information, visit their website: www.nfrc.org
What is the Energy Star® program?
Energy Star is a voluntary partnership among the U.S. Department of Energy, the U.S. Environmental Protection Agency, product manufacturers, local utilities, and retailers. Partners help promote efficient products by labeling with the Energy Star logo and educating consumers about the benefits of energy efficiency. By choosing Energy Star-labeled products, you’ll help to keep your utility bills lower, and help the environment at the same time. For more information, visit their website: www.energystar.gov (Energy Star® is a registered trademark of the U.S. Department of Energy).
What about window condensation?
Condensation is a direct result of interior humidity and the difference between indoor and outdoor air temperature. If you keep the humidity in your house low, then the likelihood of experiencing condensation is also low. However, the efficiency of your window will also impact the temperature and humidity level at which condensation occurs. Energy efficient windows will help reduce condensation. Here’s why – high performance windows with low U-factors result in inside glass surface temperatures much closer to the room air temperature. Windows with non-metal frames and more thermally-efficient spacers in the dual-pane glass units are also less likely to have condensation on the frame or at the edge of the glass. Also, realize that in certain conditions (such as humid mornings after a clear night sky), some highly insulative windows may have dew on their outside surface. These windows are such good insulators, that dew is condensing there just like it does on an insulated wall.
Can you provide me with an independent, informative website where I can learn more about energy efficient windows?
For extensive information, backed with details provided by the U.S. Department of Energy, refer to: www.efficientwindows.org